tripods, heads, monopods, light stands, camera supports, lighting supports, professional tripod 055MF3 - 055 MAG FIBER TRIPOD 3 SCT
Products
wclick on the + and - buttons or the category titles to
open or dose categories; The number to the right
indicates how many products in total are assigned to
the category and its subcategories - click on the
number to view those products
broad working height range from very low to very high
high load capacity
very flexible camera positioning
versatile product for all-round use
world-wide spares and service back-up
SUITABLE FOR:
SLR cameras with short and/or light fixed-length lenses
A rubber suction cup foot with retractable stainless steel spike. The suction cup increases the footprint of the monopod by almost 20 times, giving much greater stability when needed. The foot can be removed and replaced at will. 676SC2: for monopods 558B, 679 and 680.
The 503HDV has a completely new ergonomic, easy-to-use, functional design; features include large ergonomic locks and knobs allowing for a more solid grip and better control. For enhanced ease of use, the tilt lock and friction controls are located on the left side of the head.It has an improved and adjustable counterbalance capacity: a switch controls the different counterbalance settings, allowing the user to adjust the system to accommodate various payloads for different filming needs. The counterbalance system can be adjusted to four positions ensuring both smoother tilt movements and greater equipment safety. In addition, it has an illuminated levelling bubble - making it easy for shooters to level the camera in low-light conditions. In addition to the old 503, the 503HDV has also a replaceable pan bar rosette.
spotting scopes and sport optics
outdoor use (protected against damp/cold and easy to transport on foot)
black
7
11.0
169.0
2
134.5
64.0
Specifically designed for extreme outdoor assignments, this tripod uses the same construction as the 055PRO but uses different materials for the legs and all metal parts. Like the 055PRO, the 055MF3 has a three-faceted aluminum center column, which can offset the pressure of the locking system and the torsion caused while in the horizontal position. The legs are constructed of 1.2 mm carbon fiber tube combined with magnesium diecasting, quick-action lever locking collars made of magnesium die-casting. Each leg can be set independently in one of four angle settings using the dedicated quick-action leg angle selector. The top spider is made of magnesium die-casting, and includes the clamping system for the dual position center column plus a built-in bubble level. To assure the best thermal resistance, all parts has been assembled using a proven pressure clamping technology that eliminates failure-prone glue joints for greater durability and in-the-field serviceability. A hand-padded carrying strap, supplied with the tripod, can also operate like a hook to hang weights from in order to increase the stability of the tripod during shoots in extreme wind conditions. It is ideal support for all SLR analog/digital camera equipment, medium format cameras and spotting scopes modified for digiscoping applications. PATENTED..
leg sections use three-faceted tubing for greater anti-torsional resistance
anti-rotation tubing and leg collars make for a tripod (or monopod) that's easier and faster to open, position and close. Manfrotto uses several different types of anti-rotation system - on Magfiber and Digi series tripods, the elliptical or three-faceted shape of the concentric tubes means they cannot rotate, while on round-tubed tripods small protrusions down the length of the tube keep sections perfectly aligned
flip lever leg locks make opening, positioning and closing fast and easy. The tension of the locking mechanism is user-adjustable, and all parts can be easily serviced or replaced.
split center column allows easy and fast ground-level work
solid tripod/head plate has an industry standard 3/8" screw and three angled grub screws which stop the head from unscrewing accidentally in use and also block unwanted panoramic rotation or play between tripod and head
the built-in, carefully hand-set bubble spirit level helps make sure your horizons really are horizontal
materials, design and construction techniques have been carefully selected to help save weight without sacrificing stability or strength
Manfrotto's carbon fiber tubing is popular among outdoor photographers because it's light in weight, but not everyone knows it's also more rigid and supports heavier loads than aluminum - giving it a double advantage.
lightweight magnesium is used for die-cast parts. Magnesium has a density of 1.74g/cm3 as opposed to aluminum's 2.70g/cm3 - a 35% reduction. Despite its lower weight, magnesium is more rigid than aluminum, and has the same strength per volume.
each of the legs can be set to a different angle of spread for more flexible, versatile positioning and to help keep camera equipment well-balanced over the tripod's center of gravity.
the patented PRO model has a unique design which allows the center column to be used horizontally as an extending arm, or vertically (both right-way-up and upside-down). When used horizontally, it can be turned through 360° around the tripod, and is useful for macro work, low angle shooting, extreme balance points and off-centre work. This also makes the tripod a helpful accessory for chair-bound photographers, who can sit beside instead of behind the tripod, therefore much closer to the camera viewfinder.
MagFiber tripods have three pre-set independent leg angles for positioning flexibility and good reach of all intermediate heights between the stated minimum and maximum levels The improved spring-loaded, easy to use step mechanism offers greater stability and security than the CarbonOne push-button system it replaces.
included carrying handle makes the tripod more comfortable to transport and stays conveniently and unobtrusively attached during use
attachment
3/8'' screw
bubble spirit level (no.)
1
center column
rapid
closed length
64.0
color
black
column cross-section
three-faceted
column tube diameter
28mm
Is not sold separate from kit
false
leg cross-section
three-faceted
leg sections
3
legs tube diameter
29.2 . 24.8 . 20.4 mm
load capacity
7
material
carbon fiber tubing + magnesium castings
maximum height
169.0
maximum height (with center column down)
134.5
minimum height
11.0
patent
patented
sections - center column
2
suggested dolly
127. 127VS
weight
2
A note on suggested retail prices: Because our web site is viewed around the world, we are unable to post suggested retail prices.
Prices for Manfrotto products change from country-to-country due to variances in import duties, distribution fees, and shipping expenses.
For price information on Manfrotto products, contact your local authorized Manfrotto dealer through our dealer directory.
Product specifications are subject to change without notice. We can not be responsible for typographical errors.
